In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.
1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)
4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.
|Model||LANCOOL II – X||LANCOOL II -W|
|Dimensions||(D) 478 X (W) 229 X (H) 494|
|Motherboard||E-ATX/ATX (width: under 280mm)/M-ATX/ITX|
4.0mm tempered glass (both sides)
|Fan Support||Front (multi-way fan/radiator bracket): 3 X 120mm or 2 X 140mm
Above PSU Chamber: 2 X 120mm
Top: 2 X 120/140mm
Rear: 1 X 120mm
|Radiator||Front (multi-way fan/radiator bracket): 1 X 360/280/240mm
Top: 1 X 240mm (aligned to the left)
|Drive||Behind MB Tray: 2 X 2.5″ SSD
Hard Drive Cage: 3 X 3.5″ HDD/2.5″ SSD
Behind the Right-side Shroud Panel: 2 X 2.5″ SSD
|I/O Ports||2 X LED Control Buttons (M & C)
1 X TRRS AUDIO
2 X USB 3.0
1 X USB 3.1 TYPEC (Optional)
|Dust Filters||1 x Top (magnetic), 1 x Front Panel (magnetic), 1 x Bottom (tray)|
|Incl Fans||3 X 120mm (Front, Top, Rear)|